Chalk Markers

For additional FAQs on Chalk Markers, visit our Chalk Marker FAQ blog post.

How do I use chalk markers?

  1. PUSH - First-time use: Hold the marker tip up vertically. Press the tip slightly to release pressure.

  2. SHAKE - With the cap on, shake the marker vigorously while in the upright position. Remove the cap before use.

  3. PUSH - Press the marker tip for a few seconds until the tip fills with ink. Recap after each use and store at room temperature.

  4. REVERSIBLE TIP - All Loddie Doddie Chalk Markers have two tip styles (a chisel tip and a bullet tip). To reverse the tip, pull the tip out of the end of the barrel. Turn the tip around and reinsert it into the barrel.

What happens if the tip dries out?

If the tip of the marker seems dry and the ink does not flow out smoothly, simply take the tip out of the barrel and run it under warm water for a few minutes. Then, reinsert the tip back into the barrel and begin to follow the first-time use directions.

How can I erase the chalk markers?

The markers will erase from any NONPOROUS surface with water and a damp cloth.

What surfaces can I use chalk markers on?

Loddie Doddie chalk markers will work on any NONPOROUS surface (any surface that does not have pores). Examples include but are not limited to:

  • Porcelain Chalkboards
  • Dry Erase
  • Glass
  • Plastic
  • Glazed Ceramic Porcelain
  • Metal
  • Laminated Surfaces
  • Vinyl

*Please note that chalk paint is NOT a NONPOROUS surface and therefore chalk markers can stain it.

Are Loddie Doddie chalk markers non-toxic?

Yes, our Loddie Doddie chalk markers are non-toxic and conform to ASTM D-4236 standards.

Are Loddie Doddie Chalk Markers permanent?

No, our markers are not permanent and can be washed off of any nonporous surface with water and a damp cloth.

Can you make Loddie Doddie Chalk Markers permanent?

If you want to preserve your chalk drawing on your board permanently, we recommend using either Krylon Crystal Clear Acrylic Spray or, if you prefer a matte finish, then Aleene's Spray Acrylic Sealer Matte Finish will work well. A single coat should do if you are sealing over top of your chalk markers so they can't be erased. Be sure to follow the manufacturer's instructions on the spray can.

Can these be used for paper crafts such as scrapbooking and card making?

Yes, they can be used on paper just keep in mind since they are liquid chalk markers they may bleed through thin paper.

My Chalk Markers are Watery or not Showing up as Bright and Bold as I would like. What's up?

The chalk markers will tend to be dried out, watery or not as vibrant if the ink is not mixed up well inside the barrel prior to use. With the cap on, shake the marker for 10-15 seconds to make sure the ink is mixed up well. Then, make sure that the lid is on the marker first before giving it a good shake. Remove the lid and press down the nib on a test surface–do so firmly to pump the marker until the chalk ink floods the nib and produces a smooth mark. If your marker is still not as vibrant as it should be, take the tip out of the marker and soak in warm water for 2 minutes to get the non-mixed ink out of the nib. Then follow the same directions for the initial use. This will fill the tip with the well mixed ink and perform as it should.

Chalkboards

For additional FAQs on Chalkboards, visit our Chalkboard FAQ blog post.

What can I write on the chalkboard with?

Chalk markers or regular, old-school chalk will work perfectly on our premium chalkboard surface.

How do I erase the chalkboard?

To erase our chalk markers, simply use a bit of water and a damp cloth. To erase old-school chalk, simply wipe away the chalk with a dry cloth. If there are still stubborn marks from liquid chalk markers, try using a Mr. Clean Magic Eraser and a little bit of water to lift the marks.

Does the chalkboard surface need to be seasoned or primed?

No, our premium chalkboard surface does not need to be seasoned or primed before use.

Are all your chalkboard surfaces magnetic?

Yes, all our premium chalkboard surfaces are a coated steel surface, meaning a magnet will stick to them.

Is the surface smooth or textured?

The surface is a smooth chalk surface great for chalk or chalk markers. It is not a textured "real-slate" surface.

Is the surface nonporous?

Yes, the surface is nonporous which is ideal for liquid chalk markers.

Do I have to drill a hole in the wall to mount this or can I just use nails?

The mounting hardware provided is for drilling into a wall. However, nails can be used as well to hang the board (we recommend nailing into wall studs). There are pre-drilled holes in the back of the frame that can be used with nails as well.

Can the chalkboard be hung vertically?

Yes, the chalkboard has pre-drilled holes so that it can be hung either vertically or horizontally.

Can you make custom sizes?

No, we cannot make custom sizes at this time.

Can the chalkboard be cut to size?

No, we do not recommend cutting the chalkboard surface.

Can the chalkboard be used outside?

We do not recommend using our chalkboards outside for extended periods of time. Due to the nature of the materials used, moisture may affect the performance of the board.

What is this chalkboard made out of?

The chalk surface is made of steel with a baked chalk surface. The frame is a solid pine wood with either a stain or a laminate, depending on which style you choose.